[aarondixon]

They do look great Vince!

 

[aarondixon]

Shadow, those rims look similar to these, came up in another thread, although I think they are not 17"

The Tourins are available in 18" as well:

http://www.tourenwheels.com/wheels/tr74-matte-black-new-style/

 

[aarondixon]

OK, for the non-black rim fans, how about these:

http://www.tourenwheels.com/wheels/tr60-gunmetal/

(The hidden wheel nuts are cool)

 

[madison38]

Looks great! I've been very happy with my Nittos so far.

 

[theresayoung]

Very nice.!!

 

[kristenwilliams]

Had 18" KMC 708 Bully wheels and NItto Terra Grappler 255/60r18 tires installed this week. The tire shop only had the chrome lug nuts, so will probably end up swapping them for black soon. Otherwise, happy with the new look!

View attachment 2113
View attachment 2117 View attachment 2119

Looks great! Do you know what the tire/ weight combo is compared to stock. How does it ride and handle

 

[williamspencer]

Love the looks of the smaller rim more rubber. Still looking to see if the ride quality improves from the 20" rims.

 

[catherine74]

Looks great! Do you know what the tire/ weight combo is compared to stock. How does it ride and handle

The stock continentals and 20" rims weigh 62 pounds combined. The terra grapplers weigh 41 pounds and the kmc rims weigh 24 pounds, for a total of 65 pounds. Haven't noticed much change in ride and handling, although I haven't driven it much yet.

 

[debbiekeller]

Anybody consider going with the 18" Ridgeline wheels? Either of these:

https://www.bernardiparts.com/Departments/Accessories/Honda-Ridgeline/2017-2019/Wheels.aspx

The low profile 20" Passport tires are useless for beach driving. Why put these on a vehicle that has a sand mode? If you air down the 20" tires I doubt you increase the tire "footprint" at all. But if you air down a taller tire on an 18" wheel you would gain sand traction.

 

[rebeccaramos]

Anybody consider going with the 18" Ridgeline wheels?

I've already acquired a set of 18" Ridgeline wheels, thread #10. I found a used set in excellent condition via Craigslist. Check Facebook Marketplace, too... acquired a set of CR-V wheels for my son. 18" Pilot wheels should fit, as well.

 

[david16]

Petrol P1B wheels, 17x8. Cooper Discoverer AT3 4S tires, 255/65-17.

https://www.petrolwheels.com/custom-wheels-rims-p1b/
http://us.coopertire.com/tires/discoverer-at3-4s.aspx

 

[kristenwilliams]

Petrol P1B wheels, 17x8. Cooper Discoverer AT3 4S tires, 255/65-17.

https://www.petrolwheels.com/custom-wheels-rims-p1b/
http://us.coopertire.com/tires/discoverer-at3-4s.aspx

Very nice! Looks great

 

[david16]

Thanks.

Started my journey looking at 18 inch wheels but went the 17 route.

I have to say they look much better than in the pictures. As the manager said at Discount Tire after the install, "if this is how it looked at the dealership I'd go and buy one right now." Ha!

 

[leejames]

265/65R18 Cooper Discovery AT3 4S (31.6 inch tire)
on KMC HD 820 Grenades 18x8, 5x120 bolt pattern, 38mm offset
DIY Modification required. You have to cut out a 5"x5" square in the metal wheel well, and do a bit of hammering. I used a $59 Dremel 3000. TOTALLY WORTH IT!!!!
This mod gives a 1 inch boost to ground clearance and total side wall is 6.8 inches.

I'm not active on this forum (because I can't get it to work with Tapatalk), but I can be reached on instagram @jondz_adventuring. Just send me a message if you have any questions.

 

[williamsmichael]

Had 18" KMC 708 Bully wheels and NItto Terra Grappler 255/60r18 tires installed this week. The tire shop only had the chrome lug nuts, so will probably end up swapping them for black soon. Otherwise, happy with the new look!

View attachment 2113
View attachment 2117 View attachment 2119

Those look awesome. What offset are the rims? stock suspension? no rubs?

 

[williamsmichael]

I had my tire guy look into it , they even put them on . They fit fine , looks aggressive . Total diameter is 30.4 inches. But realistic it’s only 1/2 inche, higher on top because how it sits. It’s fine for what I need it , not extreme off road that probably wouldn’t be good . I looked into this because of a member on the PP forum said the 265/50/20 tires work. Without changing the rims size . Hope this helps you.

still no issues? can you post a pic?

 

[daniellerojas]

265/65R18 Cooper Discovery AT3 4S (31.6 inch tire)
on KMC HD 820 Grenades 18x8, 5x120 bolt pattern, 38mm offset
DIY Modification required. You have to cut out a 5"x5" square in the metal wheel well, and do a bit of hammering. I used a $59 Dremel 3000. TOTALLY WORTH IT!!!!
This mod gives a 1 inch boost to ground clearance and total side wall is 6.8 inches.

I'm not active on this forum (because I can't get it to work with Tapatalk), but I can be reached on instagram @jondz_adventuring. Just send me a message if you have any questions.

Jon: LOVE, love your videos!!! Keep em coming! I don't know if I could cut into my baby like that! (Passport). I cringed but understood the need to "trim" the front fascia. The Passport looks like it can do amazing things off road. Maybe Honda will offer an off road package (with Lift)? Do you get any warnings (dash) of over heating in the rear axle or transmission when you off road?

 

[theresayoung]

still no issues? can you post a pic?

 

[theresayoung]

No issues at all rides smooth , cooper AT3 4S all terrian tires .

 

[williamsmichael]

lookin good! think i’ll keep my oems for a while