265/65R18 Cooper Discovery AT3 4S (31.6 inch tire)
on KMC HD 820 Grenades 18x8, 5x120 bolt pattern, 38mm offset
DIY Modification required. You have to cut out a 5"x5" square in the metal wheel well, and do a bit of hammering. I used a $59 Dremel 3000. TOTALLY WORTH IT!!!!
This mod gives a 1 inch boost to ground clearance and total side wall is 6.8 inches.
I'm not active on this forum (because I can't get it to work with Tapatalk), but I can be reached on instagram @jondz_adventuring. Just send me a message if you have any questions.
![Image]()
on KMC HD 820 Grenades 18x8, 5x120 bolt pattern, 38mm offset
DIY Modification required. You have to cut out a 5"x5" square in the metal wheel well, and do a bit of hammering. I used a $59 Dremel 3000. TOTALLY WORTH IT!!!!
This mod gives a 1 inch boost to ground clearance and total side wall is 6.8 inches.
I'm not active on this forum (because I can't get it to work with Tapatalk), but I can be reached on instagram @jondz_adventuring. Just send me a message if you have any questions.