Honda Passport Forum banner
1 - 3 of 3 Posts
Discussion starter · #1 ·
Spent the afternoon applying Door Sill Protection Film on each of the door sills. Looks good on white and also on black (seen at dealership). Applied the Rear Bumper Applique, too. Both require prep, time and patience. The rear bumper was more difficult. Because the applique is clear, have to insure there is no specks of dirt under the film and it is necessary to remove all the air bubbles for best results. Requires 3M Protective Tape Application Solution or make your own (25% alcohol, 75% water, 4 drops dish detergent liquid per pint). Heat (hair dryer) helps with adhesion and bending the film over the edge.

Front right, rear right, left bumper, right bumper...

 
Oh, those look great, I ordered these with my car, still waiting for the dealer to get them in though..

BTW: the week after next, I'm getting my entire front end (Hood, fenders, headlights, fog & turn lights, and the gloss black piece around the grill, mirror-fronts, and door handles) all covered with the clear mylar stuff...
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.